Daily Archives: January 19, 2012

Tata Steel wins wind turbine deal for Scunthorpe

A steel giant which is shedding 1,200 jobs at its Scunthorpe plant has secured a multi-million pound contract to supply a wind turbine manufacturer.

Tata Steel announced the order for 25,000 tonnes of steel plate, which is the largest so far for its dedicated wind tower site in North Lincolnshire.

Delivery of the steel is expected to start in April and Siemens will use it to build about 150 onshore turbines.

Tata Steel said it aims to be “a key supplier” in the offshore wind market.

Phil Knowles, a commercial manager for the firm, said: “Demand for steel in the renewable energy sector will continue to grow, and we’re ideally placed to help our customers tap into this important opportunity.

“The agreement we’ve negotiated with Siemens Wind Power is a strategic customer alliance that will help in our objective to be a key supplier in the offshore wind power market.”

Unions have said the job losses will have a big impact on local communities.

The Indian firm’s wind tower hub in Scunthorpe was established in 2010 to process and distribute steel plate to manufacturers of wind turbine towers.

Source: http://www.bbc.co.uk/news/uk-england-humber-16615460

Tagged

Vacancy – Senior Structural Designer, Aberdeen

Employer: AMEC
Job Code: 6300BR
Salary Details: Temporary Role
Country: United Kingdom
City: Aberdeen
Address:
Job Sector: Oil & Gas
Apply Now

Execute structural design and draughting activities within budget and schedule
Key aims and objectives
Execute design and draughting activities (Concept, Front End Engineering Development, Technical Study & Detailed Design) Prepare structural drawings and designs from agreed work scopes with minimum input from engineering personnel
Prime responsibilities and duties
Achieve safety standards as defined in personal performance contract Responsible for assessing effectiveness of working practices and systems with a view to continuously improving systems, personal and team performance Carry out work in accordance with AMEC and project Health, Safety, Environmental and Quality systems Carry out site surveys Identify scope and schedule changes in accordance with the Change Control Process Ensure, as far as is practically possible, that all assigned work is carried out in compliance with the agreed budget and schedule Maintain required technical quality of work Keep up to date with technical developments, National and International standards and legislative requirements related to discipline workscope Maintain filing system Encourage and provide lateral learning within the project
Qualifications/Training Essential: ONC or equivalent in appropriate engineering subject
Desirable: HNC or equivalent in appropriate engineering subject
Experience Essential: Experienced designer with sound technical background and strong knowledge of manual and CAD draughting techniques Conversant with codes of practice, standards and relevant sections of statutory documentation applicable to draughting function Conversant with company quality control assurance requirements applicable to draughting function Able to create base design drawings / models from agreed workscope with minimal input from engineering personnel Ability to accept delegated responsibility and control budgets for delegated tasks Computer literate (database / spreadsheets) Able to provide draughting checking function as directed by lead designer
Desirable: Capable of directing activities and motivating junior members of design team Able to communicate clearly with engineering personnel Able to contribute to group / discipline objectives applicable to draughting function Able to identify improvement opportunities and techniques relevant to draughting personnel
Personal Qualities Competent designer noted for past achievements

Required Experience: 10 years+
Position Type: Permanent
Job Hours: Full Time
National Residency or Valid Work Permit required: Yes
Required for work/interview immediately: Yes
Post Date: 19/01/2012
Expiration Date: 30/03/2012
Tagged

Why Nuclear Power Could be the Best Solution for California’s Energy Needs

The California Council on Science and Technology has examined the potential of nuclear energy to meet California’s electricity demand in the year 2050.  The main focus of the organization’s analysis is on the CCST Realistic Model, which assumes that total electricity demand in California in the year 2050 amounts to 510 terawatt-hours per year (TWh/y). Since nuclear electricity is capital intensive, it is most economically used as baseload power where the plants run at their maximum output all of the time.  It is also assumed that nuclear plants have a 90 percent capacity factor and that baseload power represents 67 percent of total electricity demand, the rest being supplied by renewables as mandated by California’s law AB32.  This requires about 44 gigawatts (GW) of nuclear electricity capacity.  Large-scale growth in nuclear energy in California will be part of a large-scale growth worldwide, which affects infrastructure and work force requirements.  Consequently, the Council’s analysis assumes that California only gets its fair share of resources needed to scale up, but an expanding nuclear industry results in economies-of-scale which makes nuclear power less expensive for California.

Reactor technology is certain to evolve over the period of interest and future reactors will have characteristics similar to the new generation of large, advanced, light-water reactors (LWR), known as GEN III+ that are now under review by the U.S. Nuclear Regulatory Commission for deployment in the next decade.  These are under construction in Asia and Europe, and a larger number of similar systems have been built in Asia recently.  Based on the assumption that future U.S. reactors will be built to these new standards, the Council’s conclusions on technical issues are as follows:

• There are no technical barriers to large-scale deployment of nuclear power in California.  There are, however, legislative barriers and public acceptance barriers that have to be overcome to implement a scenario that includes a large number of new nuclear reactors.

• The cost of electricity from new nuclear power plants is uncertain. No new ones have been built in decades, though 104 generating plants are operating in the U.S. today.  Thus, operations, maintenance and fuel costs are known well, but the dominant cost, the amortization of construction costs, is uncertain.  Estimates of electricity costs from new plants range from 6 to 8¢ per kilowatt-hour (KW-hr) up to 18¢ per KW-hr with most estimates at the lower end of the range. Our conclusion is that 6 to 8¢ per KW-hr is the best estimate today.  This is discussed in more detail in section II.

• Loan guarantees for nuclear power will be required until the financial sector is convinced that the days of large delays and construction cost overruns are over. Continuation of the Price-Anderson act is assumed.

• Nuclear electricity costs will be much lower than solar for some time.  There is insufficient information on wind costs yet to allow a comparison, particularly when costs to back up wind power are included.

• Cooling water availability in California is not a problem. Reactors can be cooled with reclaimed water or with forced air, though air-cooling is less efficient and would increase nuclear electricity prices by five to ten percent.

• There should be no problem with uranium availability for the foreseeable future and even large increases in uranium costs have only a small effect on nuclear power costs.  There may be shortages of natural uranium in the long term, but there are ways to get around them.

• While there are manufacturing bottlenecks now, these should disappear over the next 10 to 15 years if nuclear power facilities worldwide grow as expected.

• There are benefits to the localities where nuclear plants are sited.  Tax rates in California are set by the State Board of Equalization, typically at one percent of the cost of the plant, and collected locally. By current estimates this would amount to $50 million per year per gigawatt of electrical capacity (GWe). In addition, about 500 permanent jobs are created per GWe.

• The events at Fukushima, Japan where a number of boiling water reactors (BWR) were damaged in a major earthquake and tsunami will trigger review and evolution of safety in design, operation and management. The information gained during the Fukushima review and any recommendations made should be factored into decisions about the potential future use of nuclear reactor technologies in California.

By. Burton Richter, Robert Budnitz, Jane Long, Per Peterson, and Jan Schori of Energy Digital

Source: http://oilprice.com/Alternative-Energy/Nuclear-Power/Why-Nuclear-Power-Could-Be-The-Best-Solution-For-Californias-Energy-Needs.html

Tagged
Follow

Get every new post delivered to your Inbox.

Join 1,738 other followers

%d bloggers like this: